top of page

WE PRESENT YOU.....

output_SyV5io.gif

A Professional complete Tilt Table

Complete KIT with rubberized table

Only tilt kit for to upgrade your bonsai table (Green t - kikuwa and many other)

20200704_114502_clipped_rev_1.png
20200704_114502_clipped_rev_1.png
20200704_114502_clipped_rev_2.png
20200704_114417_clipped_rev_3_edited.png

Our fantastic new tilting table

LET'S START FROM THE SUPPORT PLAN:

To ensure the stability of your bonsai, whether it is in a pot or in a bowl, we have used a new rubber formula. Unlike the Tbtable, this coating does not allow the vessel to be dragged but guarantees immediate anchoring of the vessel by sinking slightly. The rubber used is 3mm thick and guarantees good abrasion resistance.

20200704_114502_clipped_rev_1.png
ancora tavolo
Schermata 2020-07-05 alle 12.13.10.png

Move at will

stoppers

IMG-20200704-WA0105.jpeg

On the entire support surface you will find holes to screw the stops, (we call them STOPPER).

These special fasteners that we offer are entirely made of rubber and do not risk damaging the vase while making the anchor even more secure. You will find 2 fasteners included in the kit but in the store you can buy others.

The stoppers follow the movement of the pot, at the base they are firm and safe and do not allow the pot to slide, just one strap will be enough to prevent the plant from moving.

Thanks to the STOPPER it is possible in many cases to work without even having to tie the plant, however it is always preferable to do it and we recommend it. You can count on 10 rope tensioners placed under the top or the transformation kit for tying the plant.

Leonardo system
-
Strengths

20200704_172458_edited.jpg
20200704_114611_clipped_rev_1.png

With the compression adjustment you can stiffen the rotation so as to ensure the safety of putting on the forehead even without the help of anyone:

1- set the pre-load with the tool provided

2 - prone

3 - checks

4 - tighten the safety arms

The structure is extremely solid, we guarantee the hold of the top at maximum inclination up to 80 kg of load and over 100 kg in inclinations within 30 degrees

20200704_114502_clipped_rev_1.png
20200704_114502_clipped_rev_1.png

The off-axis of the top is only 4 cm at the maximum inclination of over 50 ° ... in practice it works almost in axis and this is Leonardo's real secret.

Use the release to help you with the resistance of the hob and to tighten definitively when the inclination is correct

Schermata 2020-07-05 alle 09.00.13.png

With the bubble you always find the same